Commodore 1802 Monitor Capacitor List (for 220V/240V PAL version)
-----------------------------------------------------------------

Compiled by Guru (http://gurudumps.blogspot.com.au)

Notes:
1. Higher voltage caps can be used.
2. DON'T use lower voltage caps or different uF rating!
3. In general if you want your monitor to last replace ALL of the capacitors.
4. Only use quality Japanese capacitors from companies like Rubycon, Nichicon,
   Nippon Chemi-Con, Matsushita/Panasonic etc etc.


Neck board: none

Main board: 
C101    50V  1uF
C102    16V  1000uF
C103    50V  1uF
C202    50V  3.3uF
C204    25V  22uF
C206    16V  10uF
C214    16V  10uF
C219    50V  1uF
C221    50V  0.47uF
C303    50V  0.47uF
C308    35V  100uF
C310    35V  470uF
C311    50V  2.2uF (top marked C312)
C318    35V  470uF
C324    25V  220uF
C325    16V  100uF (marked on bottom, top has no marking)
C402    25V  22uF
C403    50V  1uF
C406    50V  0.47uF
C410    50V  4.7uF
C411    16V  10uF
C421    160V 10uF
C424    25V  1000uF
C430    160V 1uF
C503    50V  1Uf
C505    50V  0.47uF
C518    50V  4.7uF
C5XX?   16v  470uF (no location or polarity mark on PCB, + leg of cap has a connection to pin 2 of I201, - leg is connected to L503)
C601    16V  10uF
C602    16V  470Uf
C605    16V  47uF
C606    16V  47uF
C607    16V  470uF 
C608    16V  100uF
C610    25V  22uF
C612    16V  10uF (top incorrectly marked C605)
C701    16V  10uF
C702    16V  10uF
C703    16V  10uF
C704    50V  10uF
C706    16V  10uF
C801    400V 150uF SNAP-IN TYPE diameter 30mm x length 32mm
C806    160V 2.2uF
C812    160V 100uF
C813    160V 100uF
C814    25V  1000uF (bottom incorrectly marked R814)
C825    160V 10uF
C826    25V  100uF
C827    16V  470uF